Analog AUDIO over fiber
Analog Audio over one fiber Transmitter and Receiver kit helps solve sending unbalanced audio over long distances using Fiber.
We have several different models supporting 2, 4, 8,16 and 32 analog XLR Audio.
The audio fiber optic Transmitter converts analog Audio 20hz to 20Khz fiber optic modulated digital stream so it could be transported over single mode fiber. (long haul available) - XLR to Optical
The Optical Receiver with XLR outputs converts the optical signal back to its original Analog Wave form - Optical to XLR
Offers very low latency 1ms so it's perfect for live events, shows, concerts, auditoriums, etc
The small and compact form factor means it could be used for any applications where copper has a limited distance or noise issues.
Thor Analog Audio to Fiber Converter Applications:
Churches, Concerts, Military, Schools, Apartments, Cinemas, Cable TV, Headsets, TV Studio, Stadiums, or any live events
Terminal block connector
Point to point as well as point to multipoint transmission applications
Singlemode fiber supported
ST/PC fiber connector or different per request
LED indicators
Stand alone or rack mount blade available
Short and long haul signal transport up to 120Km - model dependent
Compact portable size
600 Ω Unbalanced
| Bandwidth: | 20Hz ~ 20KHz |
| Bit Resolution: | 24-Bit |
| Signal-to-Noise Ratio(SNR): | > 80 dB |
F-XXA-TX-YY-ZZ
XX -Number of Audios
YY-Distance in KM --- default is 20Km on singemode fiber (40, 60, 80, 120km upon request)
F-2A-TxRx - 2 Unbalanced Uni-Directional Audios over 1 fiber Transmitter and Receiver kit
F-4A-TxRx - 4 Unbalanced Uni-Directional Audios over 1 fiber Transmitter and Receiver kit
F-8A-TxRx - 8 Unbalanced Uni-Directional Audios over 1 fiber Transmitter and Receiver kit
F-16A-TxRx - 16 Unbalanced Uni-Directional Audios over 1 fiber Transmitter and Receiver kit
F-32A-TxRx - 32 Unbalanced Uni-Directional Audios over 1 fiber Transmitter and Receiver kit
F-2A-B- TxRx 2 Unbalanced Bi-Directional Audios over 1 fiber Transmitter and Receiver kit - Single mode:
Sends 2 Audios and Receives 2 Audios, perfect for Intercom or Audio communication in both directions
F-4A-B- TxRx 4 Unbalanced Bi-Directional Audios over 1 fiber Transmitter and Receiver kit - Single mode:
Sends 4 Audios and Receives 4 Audios, perfect for Intercom or Audio communication in both directions
F-8A-B- TxRx 8 Unbalanced Bi-Directional Audios over 1 fiber Transmitter and Receiver kit
F-16A-B- TxRx 16 Unbalanced Bi-Directional Audios over 1 fiber Transmitter and Receiver kit
|
|
Transmitter |
2 Analog AUDIO over fiber Tx/Rx |
|
|
Receiver |
|
|
Transmitter |
4 Analog AUDIO over fiber Tx/Rx |
|
|
Receiver |
|
|
Transmitter |
8 Analog AUDIO over fiber Tx/Rx |
|
|
Receiver |
|
|
Transmitter |
16 Analog AUDIO over fiber Tx/Rx |
|
|
Receiver |
| Audio Interface | Terminal block |
|
Audio input/output impedance |
600 ohm - unbalanced |
| Audio Level voltage | up to 2V-pp |
|
Audio Level |
0 dbm |
| Audio bandwidth | 10hz to 24.5khz |
|
Sample Rates |
48kHz |
|
Digital bandwidth |
24 bit |
| SNR | better than 79db |
| THD@1khz | 1% |
| Optical connector | ST/PC (other connectors available by request -extra $) |
| Optical fiber distance |
fiber and up to 20KM on - 9/125u single mode fiber (Other distances are available by request - extra$) |
| Optical Wavelength | 1310nm ( other -1550nm or CWDM are available per request- extra$) |
| Power | 5V DC |
| Power Comsupcion | 3W |
| Power Adaptor | AC-90-240AVC / 5060HZ |
| Dimensions : | 7" x 6.5" x 1" |
|
Operating Temperature |
-20°C ~ +75°C |
|
Weight |
1lb |
| MTBF | over 100,000 hours |