RF input - Video /Audio Ouput

Satellite Decoders, IRDs, STB ATSC Receivers

The hardware decoders receive the encoded compressed video and audio streams and output uncompressed video and audio—such as HDMI, SDI, or analog CVBS—that can be directly connected to a TV or monitor. These devices are typically used at the receiving end and work in conjunction with encoders.

Encoders convert uncompressed video and audio to compressed formats like MPEG2, H.264, or H.265 for bandwidth conservation and output the streams as IP, ASI, or modulated RF. Decoders perform the reverse operation.

Thor offers a wide range of broadcast decoders, including models with IP input, ASI input, and CATV RF input. Some models also combine decoding functionality with gateway capabilities—for example, converting multi-channel RF QAM, ASI, DVB-T, or ISDB-T to IP or DVB-ASI.

The decoders can handle the following signal conversion scenarios: ATSC to SDI/HDMI, 8VSB (ATSC) to IP, Satellite DVB-S/S2 to SDI, HDMI, IP, or ASI. They can also perform RF-to-RF modulation conversions, such as 8VSB (ATSC) to QAM, QAM to ATSC, or DVB-S/S2 to QAM or 8VSB (ATSC).

H-16ATSC-IP-16QAM, H-16QAM-IP-16ATSC, H-16QAM-IP-16QAM, H-16DVBS-IP-16ATSC, H-16DVBS-IP-16QAM, H-16DVBS-IP-16DVBT, H-16DVBT-IP-16QAM, H-16ATSC-IP-16ATSC,

starting at: 6,495.00 $

16 RF Tuners to IPTV TS & RF Transmodulator Output

The transmodulator is a multi-standard RF CATV device used for the multiconversion of digital transmissions, supporting QAM, ATSC, and satellite DVB-S/S2, as well as DVB-T, DVB-C, and ISDB-T for both inputs and outputs. It facilitates various modulation conversions, such as ATSC to QAM, QAM to ATSC, QAM to QAM, DVB-S/S2 to QAM, DVB-S/S2 to ATSC, DVB-S/S2 to DVB-T, and DVB-S/S2 to ISDB-T

H-IRD-V3

starting at: 1,995.00 $

IRD - Satellite or ATSC Decoder to SDI, IP, ASI, Closed Captions

2 x Satellite DVBS/S2 RF Input

2 x ATSC Tuners RF Input IRD

Satellite DVBS/S2 RF Input

High end state of the art decoder with RF tuner, advanced IP streaming, front LCD confidence monitor, and supports 608 and 708 closed captioning. RF tuners for DVB-S2, ATSC, and QAM are available. All settings and alarm information are available through web browser based network management console.

H-8ATSC-IP

starting at: 3,495.00 $

ATSC or QAM to IP gateway, ATSC QAM IPTV broadcast system

New

8 x ATSC Inputs to IP

8 x Satellite DVBS/S2 to IP

8 x DVB-T Tunners to IP

8 x ISDB-T Tunners to IP

8 x QAM Inputs to IP

8 x ATSC Antenna Tuners to IPTV 8 x CABLE QAM Tuners to IPTV 8 x Satelite DVB-S2 Tuners to IPTV 8 x DVB-T Tuners to IPTV 8 x ISDB-TTuners to IPTV

H-IRD-V4

starting at: 3,495.00 $

4 X Satellite or ATSC IRD Decoder to IP and ASI

4 x ATSC Inputs

4x Satellite RF Input with CAM

4x DVB-T Inputs

4x ISDB-T Inputs

4 x QAM inputs

Four independent RF tuners demodulate the entire carrier band frequency to IPTV MPTS, ASI and CATV QAM. High density program stream IRD for satellite, terrestrial ATSC, DVB-T, ISDB-T and QAM cable TV applications. ASI input for multiplexing additional TS programs to output simultaneously. 5 different RF tuner options available: ATSC, DVB-S2, DVB-T, ISDB-T or QAM (model dependent)

H-16ATSC-IP, H-16QAM-IP, H-16DVBS2-IP

starting at: 4,495.00 $

16 RF Tuners to IPTV

16 x DVB-T/T2 tuners to IP

16 x Off Air ATSC Inputs tuners to IP

16 x Cable QAM Inputs tuners to IP

16 x Satellite DVB S/S2 tuners to IP

This is a Family of products equipped with 16 RF Tuners, tuners could decode the following: QAM Annex A&B, DVB-T, DVB-T2, ISDB-T; model dependent units ATSC, DVBS/S2 The unit works as an RF to IP Gateway and can output IP SPTS Multicast or Unicast CONVERT 16 CATV RF to IP

Thor Broadcast Sales

[email protected]

1(800)521-THOR (8467) Ext 1

1(800)521-6384

Customer Service / Support

1(800)521-THOR (8467) Ext 2

[email protected]

CATV Modulators